Question 1Which of these statements is accurate regarding SNT-TC-1A?A. SNT-TC-1A is designed for a specific set of industrial sectors.B. SNT-TC-1A was created to fulfill ASME specification requirements.C. The last revision of SNT-TC-1A occurred in 1998.D. SNT-TC-1A is not meant to be used as a strict specification. Question 2What must an inquiry to the SNT-TC-1A interpretation panel include?A. It should be written in general terms.B. It must include specific details such as names and locations.C. It will be reviewed by the ASNT Board of Directors if it affects their position as a mediator.D. It should be evaluated by the Technical and Educational Council of ASNT before a response is prepared. Get access to Latest ASNT NDT Level III Question Bank.. You will not regret. Question 3Which statement is correct?A. ASNT has been offering certification exams for Level 3 personnel since the late 1960s.B. SNT-TC-1A was first published in the late 1960s.C. Level 3 personnel must be certified by ASNT according to SNT-TC-1A.D. SNT-TC-1A was developed to meet qualification requirements for NDT personnel as outlined in parts of the ASME Boiler and Pressure Vessel Code. Question 4What is the employer's responsibility regarding the training of NDT personnel?A. They must conduct all training on their premises.B. They may hire outside services to conduct training on their premises.C. They should avoid conducting training too close to company issues.D. They can hire outside services but remain responsible for certifying NDT personnel. Question 5What is the purpose of SNT-TC-1A for employers?A. To create a strict specification for written practices.B. To establish written practices for the qualification and certification of NDT personnel.C. To outline training course requirements for external contractors.D. To define requirements for corporate members of ASNT. Question 6What should be done if the SNT-TC-1A guidelines are inappropriate for certain employers?A. The employer must alter operations to comply with the guidelines.B. The employer should seek exceptions from ASNT for unsuitable applications.C. The employer should review and modify the guidelines as needed.D. The employer must submit a written inquiry to the SNT-TC-1A Interpretation panel. Question 7Which of the following statements is false?A. Certification is written proof of qualification.B. Qualification requires skills, training, and experience for specific job duties.C. The employer is any corporate or private entity employing personnel for wages.D. A certifying agency consists of any organization training NDT personnel. Question 8Who is responsible for determining whether an individual should be qualified and certified if they monitor NDT but do not perform it?A. ASNTB. The individual's employerC. A government regulatory agencyD. The customer’s auditors Question 9Which NDT method is SNT-TC-1A not applicable to?A. Visual testingB. Thermal/Infrared testingC. Acoustic Emission TestingD. Holographic Testing Question 10How does ASNT intend for the recommendations of SNT-TC-1A to be applied?A. With flexibility and reasonB. Exactly as writtenC. As minimum requirementsD. As maximum requirements Question 11Who is best suited to determine the need for qualifying and certifying personnel operating digital thickness equipment?A. ASNTB. ASMEC. The employerD. The customer Question 12What does certification entail?A. The skills, training, and experience necessary for specific job duties.B. Written proof of qualification.C. Certification from an organization independent of the employer.D. Certification from an organization hired by the employer. Question 13When is the use of SNT-TC-1A mandatory?A. When testing materials for a U.S. Air Force contract.B. When testing materials for a U.S. Navy contract.C. When specified by the customer.D. When testing materials for a U.S. Army contract requiring NDT personnel certification. Question 14What are the basic qualification levels recommended by SNT-TC-1A?A. Trainee, Level 1, Level 2, Level 3B. Trainee, Apprentice, Level 1, Level 2, Level 3C. Level 1, Level 2, Level 3D. Level 1, Level 2, Level 3, Instructor Question 15Should personnel operating ultrasonic digital thickness measurement equipment be qualified and certified?A. Yes, because SNT-TC-1A requires all NDT personnel to be certified.B. No, because SNT-TC-1A does not cover that specific operation.C. Only if required by industry codes and standards.D. Whether they should be certified depends on the employer's needs and customer requirements. Question 16Regarding a Trainee's activities, which statement is true according to SNT-TC-1A?A. The trainee cannot conduct NDT independently or report results.B. The trainee may interpret results under written instructions but cannot conduct tests independently.C. The trainee can be considered Level 1 if working with a certified individual who co-signs reports.D. After working with a certified individual, the trainee may perform activities independently as directed. Question 17Which statement about a Level 3’s qualifications is not true according to SNT-TC-1A?A. They must assist in establishing acceptance criteria.B. They must train and evaluate Level 1 and 2 personnel.C. They should be familiar with commonly used NDT methods.D. They must establish techniques and select test methods. Question 18An NDT Level 1 may be qualified to perform which of the following?A. Specific calibrationsB. Specific NDTC. Specific evaluationsD. All of the above, including writing test reports Question 19Can a Level 1 independently perform, evaluate, and sign off on NDT test results with guidance from a Level 2 or 3?A. Yes, if following written instructions from a Level 3.B. No, they must be under constant supervision.C. No, a Level 1 cannot sign off on results.D. No, a Level 1 is not allowed to take any independent action. Question 20Which statement about the definitions of Trainee, Level 1, 2, and 3 in SNT-TC-1A is true?A. Level 3 qualifications equal or exceed those of Level 2.B. SNT-TC-1A helps employers assess proficiency at each level.C. Levels 1, 2, and 3 cannot be subdivided, and Level 3 cannot perform Level 2 functions without passing the Level 2 exam.D. A Trainee may perform all Level 1 functions following written instructions. Question 21Which activity is not within the scope of a Level 2 individual's responsibilities according to SNT-TC-1A?A. Calibrating equipmentB. Preparing written instructionsC. Establishing techniquesD. Providing training Question 22As per SNT-TC-1A, what can a Level 2 do?A. Conduct on-the-job training for Level 1 personnel, guiding them.B. Be responsible for training and examining Level 1 personnel for certification.C. Must be capable of establishing techniques and methods.D. Conduct on-the-job training for Level 1 personnel. Question 23According to SNT-TC-1A, which statement about a Level 3 is true?A. A Level 3 must have at least two years of science or engineering study.B. It is preferable for a Level 3 to be a registered professional engineer.C. A Level 3 is responsible for establishing all acceptance criteria.D. A Level 3 should evaluate test results based on codes, standards, and specifications. Question 24Who is responsible for creating a written practice for NDT personnel training and certification according to SNT-TC-1A?A. The NDT Level 3B. The employerC. ASNTD. A relevant regulatory authority Question 25How should the responsibilities of each certification level regarding material acceptability be documented?A. They need not be detailed in the employer's written practice since SNT-TC-1A defines them.B. They should be documented only if different from SNT-TC-1A recommendations.C. They must be included in the employer's written practice in all cases.D. They should be documented if required by customer demands. Question 26What factors should be considered to ensure a candidate for NDT certification understands relevant principles?A. Training, experience, and educationB. Training, experience, and previous certificationsC. Education, experience, and time spent on NDT tasksD. Training, experience, and professional credentials Question 27Which statement is true regarding overtime as recommended by SNT-TC-1A?A. Overtime cannot be counted towards minimum experience.B. Overtime counts only if qualifying in multiple methods simultaneously.C. Overtime can be credited based on total hours worked.D. SNT-TC-1A does not have a specific recommendation regarding overtime. Question 28What is the recommended minimum educational requirement?A. Level 3 onlyB. Levels 2 and 3 onlyC. None of the levelsD. All three levels Question 29In leak testing, how do recommended experience and training differ?A. They vary based on each of the four main techniques.B. They do not differentiate between techniques.C. They are specified only for Levels 2 and 3.D. They are significantly higher for ultrasonic testing. Question 30What education and experience should a Level 3 candidate have?A. A 4-year degree in engineering or science plus one year of NDT experience.B. A 4-year degree in NDT plus three months of experience comparable to Level 2.C. Two years of NDT experience for high school graduates.D. Six years of NDT experience if the candidate did not graduate high school. Question 31How should records verifying qualifications be maintained?A. Daily or weeklyB. Monthly or hourlyC. Fractional yearlyD. Fractional hourly Question 32For someone qualifying directly to Level 2 without prior Level 1 experience, what is the recommended experience?A. The time recommended for Level 2B. The time recommended for Level 3C. The combined times for Levels 1 and 2D. At least six months for any method Question 33Why are training times for Level 1 sometimes longer than for Level 2?A. Candidates must receive more training at Level 1 regardless of the NDT method.B. Some numbers in the table may be incorrect.C. Level 2 candidates generally have more formal education than Level 1 candidates.D. Some methods necessitate more initial training at Level 1 due to complexity. Question 34How are recommended training hours for a specific method determined?A. Based on the candidate's educationB. The same regardless of the candidate's educationC. Based on the candidate's experienceD. Reduced if qualifying in multiple methods simultaneously Question 35What is recommended for a training program aimed at qualification and certification?A. One-on-one practical instruction from a Level 3B. Training applicable across industries using the methodC. An examination to confirm comprehension of the training materialD. A practical exam to verify understanding of the training material Question 36What do the recommended training course outlines include?A. Included in CP-105 and must not be alteredB. Included in the latest editions of SNT-TC-1AC. Listed in CP-105 for the specified methodsD. Not available for leak testing Question 37For candidates with varied educational backgrounds, how are recommended instruction periods determined?A. The same regardless of educational backgroundB. The same for all backgrounds but different for Levels 1 and 2C. Different based on educational backgroundD. Different based on educational background but the same for Levels 1 and 2 Question 38Where can recommended training reference materials be obtained?A. Only through ASNTB. From various sourcesC. Only those listed in the referenceD. Must be available to each trainee Question 39What topics are covered in the recommended training course outlines?A. Technical principles of the methodB. Review of API 1101 requirementsC. Review of ASTM guidelinesD. Review of interpretation requirements in ASME B31.3 Question 40According to SNT-TC-1A, what are the responsibilities of an NDT Level 3?A. Ensure Level 2 personnel examine Level 1 personnelB. Interpret all test results from Level 2 personnelC. Develop all examination questions for Level 1 and 2 personnelD. Write all company standard operating procedures Question 41Who can conduct and grade examinations for Level 1 and Level 2 personnel?A. An NDT Level 2B. A selected representative from Level 3C. ASNT personnel who provide regular examinationsD. The company president Question 42Which personnel can administer the near-distance vision acuity test using Jaeger letters?A. An NDT Level 2B. The plant receptionistC. An NDT Level 3D. The employee's medical doctor Question 43What should the physical examination requirements be according to SNT-TC-1A?A. The same for all methodsB. The same for all employersC. Related to each employer's specific needsD. As specified in applicable sections of the ASME Boiler and Pressure Vessel Code Question 44What does the General examination aim to cover?A. Basic test principles of the methodB. Only material in the SNT-TC-1A training outlinesC. The operational capabilities of the candidate's equipmentD. The operating procedures the candidate may encounter Question 45What is the purpose of the questions and answers available from ASNT?A. To compile the General examination onlyB. To compile the specific, practical, and general examinationsC. To compile the basic and method examinationsD. To compile all examinations, including general, basic, and method Question 46Which parts of the Level 1 and Level 2 examinations should be written?A. The general and specificB. The general and practicalC. The general, specific, and practicalD. Only the general Question 47What should practical examinations include for operational familiarity?A. Levels 1, 2, and 3B. Levels 1 and 2C. Levels 2 and 3D. Trainees, Level 1 and 2 Question 48What is true regarding the administration of written examinations?A. Examinees should not have access to reference materials.B. Reference data may only be supplied for practical examinations.C. Level 3 personnel should memorize everything except codes and procedures.D. Codes and specifications may be provided for reference during exams if they don’t help answer questions. Question 49When can tables, graphs, and charts be used in written examinations?A. Only during Level 1 examinationsB. Only during Level 2 examinationsC. During all examinationsD. Only for Level 2 practical examinations Question 50For Level 1 and Level 2 practical examinations, how many different checkpoints are recommended?A. 5B. 10C. 15D. 20 Question 51What is required in the certification of Level 3 personnel according to SNT-TC-1A?A. Written examinations must be given.B. General and specific examinations must be provided.C. The specific examination may be omitted.D. Written examinations can be waived if oral exams are conducted instead. Question 52What is the recommended minimum composite score for Level 1 and Level 2 examinations?A. 60 percentB. 90 percentC. 70 percentD. 80 percent Question 53For the Level 3 basic examination, what should Level 2 questions include?A. Level 2 type questions based on other applicable NDT methods.B. Based on Level 2 tasks for the specific method examination.C. Randomly selected from previous Level 2 examinations.D. Included only if the candidate is tested in more than one method. Question 54If an outside agency provides Level 3 services, what is the situation?A. The outside agency's written practices apply, and the employing company does not need their own.B. The employer must retain certification responsibility even when using outside services.C. The employer must have a Level 3 on staff, even when using outside services.D. The outside agency can certify the employer's personnel. Question 55What is true about recertification?A. Recertification can only occur through reexamination every three years.B. Recertification can be based on evidence of continued satisfactory performance.C. Certification can only be terminated if the individual leaves the certifying employer.D. Reexamination can occur only after three years at a particular level.
